Node HandbookNODE HANDBOOK中文
Plans · billing

Traffic multipliers: why two 100 GB plans are not equal

A plan states a quota. A billing rule states how much of that quota each gigabyte consumes. The second number decides what you can actually do, and it is the one people skip.

Node Handbook editorial team ·

The two numbers on a plan

NumberWhat it statesWhat it does not state
QuotaThe total the plan grantsHow fast it is consumed on your routes
MultiplierHow much quota one unit of real traffic consumes on a given routeWhether that route is the one you use

Two plans with 100 GB can therefore deliver very different amounts of usable work. The comparison only becomes meaningful when both numbers, and the scope of the multiplier, are known.

Scope is the part that matters

  • Per route or region: a multiplier may apply only to specific exit regions.
  • Per protocol: some operators count certain transports differently.
  • Per time window: peak-hour traffic may be weighted.
  • Per direction: upload is sometimes counted, sometimes not.

“2x” without a scope is not a specification. If the provider does not state the scope, that absence is itself information about how precisely the plan is documented.

Measuring your effective multiplier

  1. Note the remaining quota in the panel.
  2. Transfer a known amount — a file of a known size — through the route you actually use.
  3. Note the remaining quota again.
  4. Divide the quota consumed by the bytes transferred.

Repeat on a second route. The difference between the two results is the practical effect of the rule on your traffic, which is what you need for planning. One measurement is one data point; do it on two occasions before relying on it.

Worked comparison

PlanQuotaMultiplier on your routeUsable on that route
A100 GB1x100 GB
B200 GB3x≈ 67 GB
C80 GB2x, only on a route you do not use80 GB on your route

The headline number ranks these A, B, C. The usable number ranks them A, C, B. That inversion is the entire reason to read the rule.

What a multiplier does not tell you

  • Whether the route performs well at peak.
  • Whether the plan's exits are accepted by the services you need.
  • Whether unused quota carries over.
  • Whether the operator will change the rule mid-term — check the terms for that.

What to record

  • Quota and multiplier as published, with the date.
  • The scope: route, protocol, direction, time window.
  • Your measured consumption on one known transfer.
  • Whether the terms allow the rule to change during the term.

Scope

This page explains how to read a billing rule. It names no provider, publishes no plan comparisons, and makes no claim about any operator's pricing. The rule is whatever the provider documents; your own before-and-after measurement is the check on it.