Node HandbookNODE HANDBOOK中文
Hiddify · WireGuard / WARP outbound

netip.ParsePrefix("/24"): unable to parse IP in Hiddify WARP

The address prefix has nothing in front of the slash. That is a syntax-level fact about the generated data — not a verdict on your subscription, your carrier, your WARP account, or the client as a whole.

Node Handbook editorial team ·

Material checked on 2026-11-14. Error strings are quoted verbatim so you can match them against your own log.

What the string means

The full error usually reads error patching outbound ... netip.ParsePrefix("/24"): ParseAddr(""): unable to parse IP. It is raised while the WARP outbound configuration is being generated or parsed. The /24 with no address before it means the data being handed to the parser is not a complete address prefix.

What it cannot tell you on its own is which party produced the empty value: the subscription, the carrier, the WARP account, or the client. Establish first whether WARP is the only broken path, or whether the rest of the configuration also fails.

Three public reports name this family of error. Issue #930 is Ubuntu 22.04, at the point of adding WARP. Issue #1389 is Windows with Hiddify v2.0.5, after the WARP configuration was added and a connection was attempted. Issue #1687 is Linux on Hiddify 2.5.7, during outbound patching. Together they show the fault is not confined to one platform; none of them establishes a fix that applies to every version.

Judge by the stage where it appears

What you seeStage to judgeNext action
ParsePrefix("/24") appears the moment you add or generate WARPThe generated WARP address field, or local configuration stateKeep a redacted log; check the Hiddify version and the action that generated it
WARP entry appears, error only on connectOutbound configuration loadingDisable WARP and test the original subscription alone
No WARP involved, node list empty after a subscription updateSubscription fetch, parse or selectionUse a "no nodes after update" checklist instead
Original nodes work once WARP is offWARP path differs from the ordinary node pathKeep the working configuration; do not substitute reinstalling for diagnosis
Direct connection also fails with WARP offBase networking, or system proxy/VPN stateRestore ordinary networking before testing the client again

Step 1 — Keep a recoverable baseline

  1. Record the OS, the full Hiddify version, where the configuration came from, and whether the error appeared at "generate WARP" or at "connect".
  2. Record the first relevant log line before the error, with the subscription URL, WARP key, node addresses, username and public IP redacted.
  3. Disable WARP, select a profile you know worked, and verify that ordinary HTTPS pages and your egress IP come back.
  4. If ordinary networking still fails, quit Hiddify and check the system VPN or proxy state before generating another WARP configuration.

This step builds a comparison point. It does not prove a single root cause. Do not delete the whole configuration or upload an unredacted log.

Step 2 — Check the WARP configuration through the official flow

The Hiddify WARP guide separates the built-in feature from a custom warp:// configuration. First confirm which of the two you are using, then check whether the custom configuration contains an empty address or an incomplete prefix. Button positions vary between versions, so follow the interface of the build you actually run.

The sing-box documentation for the WireGuard address field requires a list of IP addresses with prefixes. That explains why a bare /24 cannot be parsed; it does not prove which step inside a particular Hiddify build produced the empty field. Do not paste someone else's private key, full configuration, or "universal WARP parameters" over your own.

Step 3 — Change one variable per attempt

  1. Back up the current configuration, disable the built-in WARP first, and confirm the state of ordinary nodes.
  2. If you use a custom warp://, check the address and fields you entered yourself, and rebuild only that WARP entry — leave the subscription and routing rules alone.
  3. If you use the built-in generator, regenerate once through the current version's official interface and record whether the same error changes.
  4. Check client versions only through official release channels. If the error survives an upgrade, keep the before/after versions, the platform and the reproduction steps for an issue report.

Deleting app data also deletes the configuration and the diagnostic evidence, so it should not be step one. If you do need to reset, confirm the backup restores first, and follow the official instructions for your version. The public reports available do not show that a reset generally fixes this error.

When to stop changing things yourself

  • The error involves a company or school VPN, a system network extension, or administrator rights.
  • You cannot confirm whether the configuration backup, WARP account details or subscription URL have been saved safely.
  • Regenerating several times changes nothing while the ordinary nodes still work.
  • The interface differs from this description and you cannot tell what the current control does.

At that point, keep a minimal reproduction and a redacted log. If you need the ordinary import and connection path for Hiddify, work through a general Hiddify walkthrough. If you are comparing provider-side information, check published provider facts — and do not record a WARP parsing error as a provider outage.

Sources

Hiddify's official WARP guide for the built-in and custom flows; issues #930, #1389 and #1687 as public individual reports; the sing-box WireGuard address field documentation for the format requirement. This page did not reproduce those users' devices and has no access to their private WARP configuration. The recovery order is a diagnostic method built from public evidence, not a guarantee for every version.

Frequently asked questions

Does ParsePrefix("/24") mean the node is dead?

No. The error points at address-prefix parsing. Disable WARP and test the original node separately before drawing any conclusion about the node.

Why does the error show only /24?

The text shows that the IP before the slash is empty — a syntax-level clue. Which field or which step produced the empty value has to be determined from the version and a redacted configuration.

Will upgrading Hiddify definitely fix it?

There is no consistent evidence for that. The public issues span different platforms and versions and do not guarantee that an upgrade fixes your device. Keep the configuration and a reproduction record before upgrading.

Can I just delete the app data directory?

Not as a first step. It removes both the configuration and the diagnostic evidence, and the public material does not show that it generally fixes this error. Back up, disable WARP, confirm ordinary connectivity, then follow the official recovery method for your version.

Is this the same as having no nodes after a subscription update?

Different stage. This one happens while parsing the WARP outbound configuration. The other starts with subscription fetch, parsing and profile selection.

Continue reading

allowInsecure has been removed in v2rayNG · sing-box nftables: operation not supported · Full error string index